Avoid visiting for the minor services to the repairer shop and finding the steps that we can sort out by our own to save the time and money. These are an easy way to do it by simple following easy steps. If facing so many major issues in the car that cost you too much, better to go for scrap car buyers and sell your car in Melbourne with top cash.
1-Replacing Wiper Blades
Wiper blades usually just snap in by hand. They are light in weight, easily accessible and placed on a front mirror. To removing old wipers, what all you need to do is just tilt the wiper arms upwards for easy removals of the blades. Lift the wiper arm away from the windshield and depress the small tab on the underside of the wiper where it meets the wiper arm. When the tab is depressed, slide the wiper blade off the arm by pulling downward. There will no need any specific tool to do it and don’t take more than 10 minutes.
See the video for replacing.
2-Replace Fuse:
Replacing fuse is very easy. The fuse box cover is labelled to identify the circuit just like on your home fuse box. Find the location of fuse in the vehicles owner’s manual and locate your car’s fuse panel. Then simple take off the fuse panel’s cover, locate the blown fuse, remove the broken fuse and insert a replacement fuse of the correct amperage. It doesn’t take more than 10 minutes.
How to Find and Replace A Blown Fuse in Your Car or Truck. Just have a look on video.
3- Replace an Air Filter
If you can replace a light bulb in your house, you can do this as well. To removing an old bulb and installing a new bulb, just push-in and twist. You may have to remove a lens with a screwdriver. It doesn’t take more than 10 minutes.
4- Replace an Air Filter
The filter box assembly is on top of the engine and easily accessible. Just remove the cover and lift out the filter. If you don’t aware the location just use vehicles owner manual to get the correct location. It is easy process and need a screwdriver to remove cover of filter box. If using first time it may take around 15 to 20 minutes.
5- Change your engine oil and filter
These days, engines are designed with service in mind. Old filters and oil filling location have been improved for easy removals of old oil and filter. The recommended engine oil capacity will be in vehicle owner’s manual. The used oil can be poured into the original container and dropped off at the local auto parts store. The tolls you need to replace the engine oil and filter will be oil filter wrench, drain pan, combination wrench and a funnel. The whole process takes around half an hour, but if you to the repairer shop, you need to wait at least an hour in free time schedule otherwise need to take a proper appointment and they can charge $10 to $20.
6. Replace Battery
The replacing the car battery is very easy and simple, so why do we need to go with repairer. Just open front cover of the car and you can see your battery location. It is visible and easily accessible. There would be two terminals in the battery signed as plus and minus sign. Also check if the battery has some corrosion around the terminals, you should clean them by suing baking soda in the toothbrush. And put the new battery at the same location and tight the terminals again. Make sure the plus and minus sign fitted correctly.
When you think that we can replace any of your car’s non-working part with used car parts you can choose the wreckers in Melbourne for affordable parts. At the time of dismantling the car, we always collect useful parts.